How to maintain the slitting machine?

Simple Slitting Equipment For Thin Steel Metal Sheet.jpgBefore use, the main parts of the automatic slitting machine should be inspected and filled with lubricating oil. When inspecting the disassembly and assembly automatic slitting machine, it is strictly forbidden to use unsuitable tools and unscientific operation methods; every two weeks to the machine Make a comprehensive cleaning and inspection; if the automatic slitting machine is stopped for a long time, all the bright surfaces must be wiped clean, coated with anti-rust oil, and covered with a plastic sleeve to cover the whole machine. If the automatic slitting machine is deactivated for more than 3 months, the anti-rust oil should be covered with moisture-proof paper; after the work is completed, carefully clean the equipment, and wipe the exposed friction surface and add lubricant.

To do the daily maintenance and maintenance of the slitter, do the following five points.

First, the electrical parts should be cleaned and inspected regularly to remove hidden dangers in time.

Second, the use of slitting machines is done by slitting machines and cross-cutting machines. Therefore, high-quality slitting cutters and cross-cutting cutters are used.

Third, the daily maintenance of the slitting machine should be in place. The standard is that it is smooth, clean and clear in place to ensure that the sliding part of the equipment is in good condition.

Fourth, it is maintenance work, and regular and irregular inspections of the rotating parts should be stopped. Regular adjustments are made, regular changes are made, commutators are carefully recorded, and the purpose of extending the service life of the equipment is achieved.

Fifth, improve the technical quality and degree of the personnel who operate the slitting machine. The control of the local operation must be done by a special person, and no one is allowed to operate without permission.